Product Features:
The current trend in mountain machines has been to make them smaller and more compact thus limiting the amount of area that can be used for vent surfaces. Deep snow and extreme conditions also put enormous loads on the motor which helps raise the under hood temps shortening belt life and reduces performance. The Blow Hole helps remove that heat via a high output fan.
Active venting system expels hot air even at low ground speeds or when snow is covering vents as opposed to traditional passive venting
Pulls approximately 140 CFM of air through the hood and clutch area
Prolongs belt life and helps keep clutches cooler
Heavy duty welded aluminum design is rugged yet lightweight
Air is removed from the clutch housing and fan installation does not inhibit or otherwise interfere with belt changes
Radiated hear from engine is absorbed by the cool incoming air instead of air intake/ box thus keeping intake air temps down
Gives engine a crisper and more consistent feel and makes more power when subjected to heavy powder and hillclimbing
Belt dust and other fine debris is essentially vacuumed out of under hood area helping to keep clutches and engine compartment cleaner
Also makes an excellent goggle defogger
Factory connectors allows true plug and play install and allows for quick disconnect for troubleshooting and working on snowmobile
Mounting location is clutch side knee panel
* Fits original '12-13 belt guard. If updated non-removable guard has been installed, purchase 59-59901.
† Rectifier required if DC power plug is already being used, WPS# 59-59990. Allows use of AC power plug to run Blow Hole. May also be purchased separately to supply other accessories DC power. Plug and play, no electrical modifications needed.
Tax: Sales Tax of 8.25% is required for Texas Residents only
Payment: We accept Paypal, Visa, Mastercard, American Express and Discover. Just click the Buy It Now button at the top of the page and follow the eBay checkout instructions.
Shipping: We offer free shipping to the continental United States. This does not include, Alaska, Hawaii, or any other US territories or islands. If you are wanting to purchase multiple items, we can combine the shipping cost for you at the rate of 50% off shipping for each additional item after the first.
Customer Service: If you need further assistance, you may contact us through the Ask A Question link at the top of this page. Please include the eBay Item Number that you're asking about so that we can better assist you.
The current trend in mountain machines has been to make them smaller and more compact thus limiting the amount of area that can be used for vent surfaces. Deep snow and extreme conditions also put enormous loads on the motor which helps raise the under hood temps shortening belt life and reduces performance. The Blow Hole helps remove that heat via a high output fan.
Active venting system expels hot air even at low ground speeds or when snow is covering vents as opposed to traditional passive venting
Pulls approximately 140 CFM of air through the hood and clutch area
Prolongs belt life and helps keep clutches cooler
Heavy duty welded aluminum design is rugged yet lightweight
Air is removed from the clutch housing and fan installation does not inhibit or otherwise interfere with belt changes
Radiated hear from engine is absorbed by the cool incoming air instead of air intake/ box thus keeping intake air temps down
Gives engine a crisper and more consistent feel and makes more power when subjected to heavy powder and hillclimbing
Belt dust and other fine debris is essentially vacuumed out of under hood area helping to keep clutches and engine compartment cleaner
Also makes an excellent goggle defogger
Factory connectors allows true plug and play install and allows for quick disconnect for troubleshooting and working on snowmobile
Mounting location is clutch side knee panel
* Fits original '12-13 belt guard. If updated non-removable guard has been installed, purchase 59-59901.
† Rectifier required if DC power plug is already being used, WPS# 59-59990. Allows use of AC power plug to run Blow Hole. May also be purchased separately to supply other accessories DC power. Plug and play, no electrical modifications needed.
Tax: Sales Tax of 8.25% is required for Texas Residents only
Payment: We accept Paypal, Visa, Mastercard, American Express and Discover. Just click the Buy It Now button at the top of the page and follow the eBay checkout instructions.
Shipping: We offer free shipping to the continental United States. This does not include, Alaska, Hawaii, or any other US territories or islands. If you are wanting to purchase multiple items, we can combine the shipping cost for you at the rate of 50% off shipping for each additional item after the first.
Customer Service: If you need further assistance, you may contact us through the Ask A Question link at the top of this page. Please include the eBay Item Number that you're asking about so that we can better assist you.
Характеристики
Артикул
59-59901
Габариты и вес
Отзывов: 0
Нет отзывов о данном товаре.
Вопросов: 0
Нет вопросов об этом товаре.